Barco ImagePRO-II, User Manual, Page: 135 / 196

ImagePRO-II • User’s Guide 121
5. Web Remote Control Operations
Configuring Outputs with the Web App Interface
^ÇàìëíáåÖ=lìíéìí=`çäçê=bÑÑÉÅíë=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
On the
Color Effects
page, you can change output color, brightness, gamma and
sharpness. You can also invert the color palette of an image, or set a color image to
monochrome.
To access
Color Effects
from the
Home
page, select
Setup
>
Output
>
Output Main
>
Color Effects
.
Figure 5-23.
Output Color Effects Page
On this page:
• The
Contrast
and
Brightness
settings are adjustable within a range of
0%
to
200%
. The default setting for both of these properties is
100%
.
•
Gamma
is adjustable within a range of
0.3
to
3.0
. The default setting is
1.0
.
• The
Sharpness
option sets the sharpness or softness of the output image. The
range is from
-10
(softest) to
+10
(sharpest). The default value is
0
.
For information about the
Monochrome
and
Invert
functions, refer to
Changing the
Output Color Palette with the Web App Interface
on page 121.
`Ü~åÖáåÖ=íÜÉ=lìíéìí=`çäçê=m~äÉííÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
On the
Color Effects
page, you can:
• Change a full-color image to a monochrome (grayscale) image.
Monochrome
is
either
On
or
Off
. The default setting is
Off
.
• Invert the colors in the image’s color palette by 180 degrees. The default setting
for
Invert
is
Off
.
To see examples of these color effects, refer to
Setting Output Effects
on page 58 of
Chapter 4.