Barco ImagePRO-II, User Manual, Page: 143 / 196

ImagePRO-II • User’s Guide 129
5. Web Remote Control Operations
Remotely Accessing Front-Panel Functions
The Emulator also provides:
•
SEL
and
ESC
buttons for making selections or backing out of menus
• Two navigation buttons —
UP
and
DOWN
— to take the place of the
ADJUST
knob
• All the front-panel
Input
and
Effects
buttons
• Buttons to launch the
Setup
,
Test Patterns
, and
Pan/Zoom
menus
For information about using any of the front-panel menus or functions, refer to Chapter 4
Menu Orientation
, on page 23.
i~ìåÅÜáåÖ=íÜÉ=cêçåí=m~åÉä=bãìä~íçê

To launch the
Front Panel Emulator
, use the following procedure:
1.
On the
Web App Interface
tab, click the
Launch
button below
Front Panel
Emulator
(Java Applet).
Figure 5-32.
Front Panel Emulator Launch Button
2.
The Front Panel Emulator is a Java applet that you must install the first time you
use the Emulator. To install it, follow the on-screen instructions.
If the Java applet is installed and you are prompted to run it, select either
Run this
time
or
Always run on this site
.
The
Front Panel Emulator
appears.
3.
Click an
Input
button to select an input.
4.
Click the
SETUP
button to access the
Setup Menu
. The menu appears in the
graphical display screen.
Launch the
Front Panel
Emulator