Barco ImagePRO-II, User Manual, Page: 97 / 196

ImagePRO-II • User’s Guide 83
4. Menu Orientation
Using the System Menu
Figure 4-71.
USB Backup Logo Submenu
3.
If you wish to change the name of the backup logo, press
SEL
. Use the
ADJUST
knob to change the name, as described in
Saving a Custom Format
on page 68.
Press
SEL
again when you complete the name change.
4.
Scroll to
Backup Logo
and press
SEL
.
A message confirms the success of the backup operation.
oÉëíçêáåÖ=içÖç=cáäÉë

To restore a logo file that is stored on a flash drive, use the following procedure.
1.
Insert the flash drive in the ImagePRO-II’s front-panel USB port.
2.
From the
System Menu
, select the
USB Backup/Restore Submenu
.
3.
Select
Restore Logo
. The
USB Restore Logo Submenu
appears, as shown in
the following illustration.
Figure 4-72.
USB Restore Logo Submenu
4.
Press
SEL
and scroll through the list of logos. When you locate the file you want,
press
SEL
again.
5.
Scroll to
Restore Logo
and press
SEL
.
A message confirms the success of the restore operation, and instructs you to
reboot the ImagePRO-II.
pÉííáåÖ=bíÜÉêåÉí=léíáçåë
Using the
Ethernet Submenu
, shown in the following illustration, you can view and change
certain Ethernet settings.
USB BACKUP LOGO
> LogoBackup1
Backup Logo
(FAT filesystem only)
USB RESTORE LOGO
> Logo1
Restore LOGO
(FAT filesystem only)
Note
You must reboot the ImagePRO-II to use the restored logo.