Barco ImagePRO-II, User Manual

Page: 118 / 196

104 ImagePRO-II • User’s Guide
5. Web Remote Control Operations
Web App Interface Introduction
When the file is saved, you are prompted to restart the ImagePRO-II.
5.
Click
Restart
. The system reboots using the restored configurations.

To restore a saved logo, use the following procedure:
1.
On the
Backup and Restore
tab, click
Logo Import PNG
.
2.
On the window that appears, click
Choose File
.
3.
Navigate to and select the logo that you want to restore.
You are returned to the
Logo Import PNG
window, and the filename appears
beneath the title bar.
4.
Click
Submit
.
The logo file is uploaded to the ImagePRO-II. If the unit already has a stored logo,
you are prompted to either overwrite the existing file or cancel the operation.
tÉÄ=^éé=fåíÉêÑ~ÅÉ=fåíêçÇìÅíáçå
The ImagePRO-II
Web App Interface
provides access to most of the same functions and
parameters found on the front-panel buttons and menus. To use the interface, select the
Web App Interface
tab, shown in the following illustration.
Figure 5-4.
Web App Interface Tab
From this page, you can launch the interface, a series of web pages that provide access to
key ImagePRO-II features. You also can launch the
Front Panel Emulator
, a Java applet
that lets you remotely control these and all other front-panel functions. Because the
Note
The logo file must be a .png file.