Barco ImagePRO-II, User Manual, Page: 96 / 196

82 ImagePRO-II • User’s Guide
4. Menu Orientation
Using the System Menu
Figure 4-69.
Backup Failed Message
oÉëíçêáåÖ=`çåÑáÖìê~íáçå=cáäÉë

To restore a system configuration file that is stored on a flash drive, use the following
procedure.
1.
Insert the flash drive in the ImagePRO-II’s front-panel USB port.
2.
From the
System Menu
, select the
USB Backup/Restore Submenu
.
3.
Select
Restore Config
. The
USB Restore Config Submenu
appears, as shown
in the following illustration.
Figure 4-70.
USB Restore Config Submenu
4.
Press
SEL
and scroll through the list of configuration files. When you locate the
file you want, press
SEL
again.
5.
Scroll to
Restore Config
and press
SEL
.
A message confirms the restore operation and instructs you to reboot the
ImagePRO-II.
_~ÅâáåÖ=ré=içÖç=cáäÉë

After you capture and save a logo image, you can back it up to a flash drive, using the
following procedure:
1.
On the
System Menu
, select
USB
. The
USB Backup/Restore Submenu
appears.
2.
Select
Backup Logo
. The
USB Backup Logo Submenu
appears, as shown in
the following illustration. The navigation cursor is at the default logo filename.
Backup failed
Please check USB
connection and
retry
USB RESTORE CONFIG
> SysBackup1
Restore Config
(FAT filesystem only)
Note
You must reboot the ImagePRO-II to use the restored
configuration file.