120
ImagePRO-II • User’s Guide
5. Web Remote Control Operations
Configuring Outputs with the Web App Interface
You can recall a saved configuration using the front panel, as described in
Recalling
an Input Configuration
, on page 47 of Chapter 4.
`çåÑáÖìêáåÖ=lìíéìíë=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The
Output Main
page provides a field for changing the output format, and also displays
menus for adjusting various color settings.
After configuring the output, you can save your settings for later use and recall them when
necessary. For details about these operations, refer to
Backing Up and Restoring Data
with the Web Interface
, on page 102 of this chapter.
To access
Output Main
from the
Home
page, choose
Setup
>
Output
>
Output Main
.
Figure 5-22.
Output Main Page
The following topics are included in this section:
•
Setting Output Format with the Web App Interface
•
Adjusting Output Color Effects with the Web App Interface
•
Adjusting Output Color Balance with the Web App Interface
•
Setting an Area of Interest with the Web App Interface
•
Obtaining Output EDID with the Web Interface
pÉííáåÖ=lìíéìí=cçêã~í=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The only available field on the
Output Main
page is the
Format
field. This field displays a
standard list of formats but does
not
include any custom formats you may have saved using
the front-panel
Formats
menu. To apply custom formats, refer to the
Creating Custom
Formats
section in Chapter 4 on page 66.
To change the output format from the
Output Main
page, click the down arrow in the
Format
field and select a format. If you select a format that is incompatible with the
output device, the output device does not display video. Otherwise, your change takes
effect immediately.
Summary of Contents for ImagePRO-II
