Barco ImagePRO-II, User Manual, Page: 30 / 196

16 ImagePRO-II • User’s Guide
3. Hardware Installation
Safety Precautions
p~ÑÉíó=mêÉÅ~ìíáçåë=
For all ImagePRO-II installation procedures, please observe the following important safety
and handling rules to avoid damage to yourself and the equipment:
• To protect users from electric shock, ensure that the chassis connects to earth via
the ground wire provided in the AC power cord.
• The AC socket outlet should be installed near the equipment and be easily
accessible.
råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=
Before opening the ImagePRO-II shipping box, inspect it for damage. If you find any
damage, notify the shipping carrier immediately for all claims adjustments. As you open the
box, compare its contents against the packing slip. If you find any shortages, contact your
sales representative.
The ImagePRO-II shipping box contains the ImagePRO-II unit, a power cord, and a CD.
Once you have removed all the components from their packaging and checked that all the
components are present, visually inspect the unit to ensure there was no damage during
shipping. If there is damage, notify the shipping carrier immediately for all claims
adjustments.
páíÉ=mêÉé~ê~íáçå=
The environment in which you install your ImagePRO-II should be clean, properly lit, free
from static, and have adequate power, ventilation, and space for all components.
o~ÅâJjçìåí=fåëí~ää~íáçå
The ImagePRO-II chassis is designed to be rack mounted and is supplied with front rack-
mount hardware.
When rack mounting the ImagePRO-II chassis, remember the following important points:
• Maximum ambient operating temperature for the unit is 40 degrees C.
• Leave at least one inch of space (front and rear) to ensure that the airflow through
the fan and vent holes is not restricted.
• When installing multiple units into a rack, distribute them evenly to prevent
hazardous conditions that may be created by uneven weight distribution.
Note
The ImagePRO-II chassis can also be used in a “tabletop”
configuration, without rack mounting.