Barco ImagePRO-II, User Manual

Page: 170 / 196

156 ImagePRO-II • User’s Guide
B. Remote Control Protocol
ImagePRO-II Remote Commands
•
Query Response:
System Manager Settings in the following format
SYSMGR --blkinv (Black Invalid Mode) --vfd (VFD
Brightness) --conmode (Encore Connect Mode) --unitid
(Encore Unit ID) --encoreip (Encore IP Address)
sfa`li
•
Description
: Video Color Settings for Input/Output
•
Required parameters
:
--con
(connector), for input video color
--och
(output channel), for output video color
--itype
(input type), for commands to DVI input settings
•
Parameters
:
--con
(connector): 0-4
0 = DVI, 1 = HD15, 2 = HDMI, 3 = DP, 4 = SDI1
--och
(output channel): 0-1
--itype
(input type): 0 = digital, 1 = analog
--brt
(overall brightness): [50..150]
--cbrt
(individual brightness): [50..150]
--cnt
(overall contrast): [50..150]
--ccnt
(individual contrast): [50..150]
--col
(color) (must be supplied for --cbrt or --ccnt parameters):
0 = all color, 1 = red, 2 = green, 3 = blue
--sat
(saturation): [0..125]
--hue
(hue): [-90..90]
--cinv
(color invert): 0 = Normal, 1 = Inverted Color
--csp
(colorspace): 0 = RGB, 1 = YUV
--gamma
(gamma): 0.3 - 3.0
--mono
(monochrome): 0 = Normal, 1 = Monochrome
•
Query Format 1 (Input):
VIDCOL --con (connector) --?
•
Query Response 1:
Video Color Settings in the following format:
VIDCOL --brt (ovr bright) --cbrt (R bright) (G bright)
(b bright) --cnt (ovr contr) --ccnt (R contr)
(G contr) (B contr) --sat (saturation) --hue (hue)
--cinv (invert) --csp (colorspace) --gamma (gamma)
--mono (monochrome)