ImagePRO-II • User’s Guide
149
B. Remote Control Protocol
ImagePRO-II Remote Commands
fã~ÖÉmolJff=oÉãçíÉ=`çãã~åÇë
This section lists the ImagePRO-II remote commands, sorted by category. Click a
hyperlink in the following list to access the commands for a specific category.
•
Input Remote Commands
•
Output Remote Commands
•
View Remote Commands
•
System and Ethernet Remote Commands
A second set of remote commands has been carried over from the ImagePRO. For details
of these legacy commands, refer to
Legacy Remote Commands
on page 159.
fåéìí=oÉãçíÉ=`çãã~åÇë
asffk
•
Description
: DVI Input Settings
•
Required parameters
:
--itype
(input type): Required for choosing digital or analog DVI settings.
Note:
Some of the following parameters are applicable only for digital and some
only for analog settings.
•
Parameters
:
--chgtype
(change type command): 0 = digital, 1 = analog
--itype
(input type): 0 = digital, 1 = analog
--sample
(sample mode): 0 = OverSample, 1 = OneToOne (for analog
input only)
--phase
(sample phase): [-16..15] (for analog input only)
•
Query Format
(for analog input only):
DVIIN --itype 1 --?
•
Query Response:
DVI settings in the following format:
DVIIN --sample (sample mode) --phase (sample phase)
eaNRfk
•
Description
: HD-15 Input settings
•
Parameters
:
--sample
(sample mode cmd): 0 = OverSample, 1 = OneToOne
--phase
(sample phase): [-16..15]
•
Query Format
(for analog input only):
DVIIN --itype 1 --?
•
Query Response:
HD-15 settings in the following format:
HD15 --sample (sample mode) --phase (sample phase)
Summary of Contents for ImagePRO-II
