Barco ImagePRO-II, User Manual, Page: 166 / 196

152 ImagePRO-II • User’s Guide
B. Remote Control Protocol
ImagePRO-II Remote Commands
•
Query Response:
Input Settings in the following format:
UINPUT --deint (deinterlacing type) --motion (motion
threshold) --pulldown (pulldown detection)
lìíéìí=oÉãçíÉ=`çãã~åÇë
l`e
•
Description
: Output Channel settings
•
Required parameter:
--
och
(output channel)
•
Parameters
:
--och
(output channel): 0-1
--sharp
(sharpness): -10..10
--flicker
(flicker filter): 0..20
--strobemode
(Strobe mode): 0 = OFF, 1 = ON
--strobeint
(Strobe interval): 2..100
--flip
(flip mode): 0 = None, 1 = HFlip, 2 = VFlip , 3 = HVFlip
•
Query Format
:
OCH --och (output channel) --?
•
Query Response:
Output Channel settings in the following format:
OCH --sharp (sharpness) --flicker (flicker)
--strobemode (Strobe mode) --strobeint
Strobe interval) --flip (Flip mode)
ljdo
•
Description
: Output Manager settings
•
Parameters
:
--applyedid (connector):
0-3
0 = DVI, 1 = HD15, 2 = HDMI, 3 = DP
--save
(save output configuration)
--recall
(recall output configuration)
--reset
(reset output configuration)
•
Query Format: (n/a)
sáÉï=oÉãçíÉ=`çãã~åÇë
sfbt
•
Description
: View Settings
•
Required parameters
:
--con
(connector)
--ch
(channel): Required for --percent or --pixel parameters. Not
required for --units or --save or --recall or --reset