Barco ImagePRO-II, User Manual, Page: 168 / 196

154 ImagePRO-II • User’s Guide
B. Remote Control Protocol
ImagePRO-II Remote Commands
póëíÉã=~åÇ=bíÜÉêåÉí=oÉãçíÉ=`çãã~åÇë
bafafk
•
Description
: EDID Input settings
•
Required parameters
: --
con
(connector)
•
Parameters
:
--con
(connector): 0-3
0 = DVI, 1= HD15, 2 = HDMI, 3 = DP
--vfs
(Set/Query EDID video format. See
VFS
for parameter details.)

Example
:
EDIDIN --con 0 --vfs --con 0 --new "1920x1080i
@60"
(Set DVI input EDID to "1920x1080i @60")
bkbq
•
Description
: Ethernet Settings
•
Command Format
:
ENET -i (ip address) -n (mask) -g (gateway) -d (dhcp
mode) --reset (restart enet)
•
Parameters
:
-i
(staticip address): xx.xx.xx.xx
-n
(mask): xx.xx.xx.xx
-g
(gateway): xx.xx.xx.xx
-d
(dhcp mode): 0 = no, 1 = yes
--reset
(restart enet)
•
Query Format:
ENET --?
•
Query Response:
Ethernet settings in the following format:
ENET current (ip address) -i (ip address) -n (mask)
-g (gateway) -d (dhcp mode)