Barco ImagePRO-II, User Manual

Page: 114 / 196

100 ImagePRO-II • User’s Guide
5. Web Remote Control Operations
Web Interface Overview
tÉÄ=fåíÉêÑ~ÅÉ=lîÉêîáÉï
The
ImagePRO-II Web Interface
supports remote control of all ImagePRO-II features
from a computer, tablet, smartphone, or other web-enabled mobile device. For example,
you can download and restore logos and configuration files, upgrade system firmware, run
test patterns, control input and output settings, and undo recent changes.
The interface consists of three sections:
• The
System Information
tab, which provides information about the ImagePRO-II
firmware version and lets you see when a new version is available.
• The
Backup and Restore
tab, from which you can back up system configuration
files and logos, and restore them later. For more information about these features,
refer to
Backing Up and Restoring Data with the Web Interface
, on page 102
of this chapter.
• The
Web App Interface
tab, from which you can launch either the
Web App
Interface
, which lets you remotely control most ImagePRO-II features, or the
Front Panel Emulator
, a Java applet with which you can control all front-panel
functions.
mêÉêÉèìáëáíÉë=íç=rëáåÖ=íÜÉ=tÉÄ=fåíÉêÑ~ÅÉ
To access the Web Interface, you must have:
• A PC, laptop, tablet, or mobile device with one of the following operating systems
installed:
~ Windows
®
XP, Windows
®
Vista™, or Windows
®
7
~ Mac OS
®
X
~ Red Hat
®
Linux
®
• One or more customer-supplied RJ-45 Ethernet cables
• A web browser
• An Ethernet Switch, if you do not connect directly to the unit
• The IP address of the ImagePRO-II
The default IP address for the ImagePRO-II is
192.168.0.201
. If your unit is
assigned a different IP address, use the front panel to locate it: Select
Ethernet
from the
System Menu
, and scroll to
IP
.
You can also access the ImagePRO-II over a wireless network. Refer to your network
administrator for a network user ID and password.
Note
To access the
Web Interface
, you can use most standard
browsers. Using the
Web App Interface
, which operates the
ImagePRO-II requires an HTML5-compatible browser. For
more information, refer to
Accessing the Web App Interface
on page 105 of this chapter.