Barco ImagePRO-II, User Manual

Page: 70 / 196

56 ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Outputs
Figure 4-32.
The Comp/S-Video Adjust Submenu
On this menu, there are four options.:
•
HD-15 Pedestal
and
Comp Pedestal
— Enable or disable the 7.5 IRE pedestal
on NTSC composite output. This setting is not available for PAL video.
The Pedestal settings are either
On
or
Off
. The default setting is
On
for NTSC
video.
•
HD-15 SC Phase
and
Comp SC Phase
— Set the encoder output subcarrier
phase. The range for this setting is
-180
to
+180
degrees. The default setting is
0
.
pÉííáåÖ=lìíéìí=póåÅ
The
Output Sync Settings Submenu
lets you specify the sync types for selected outputs.
Access this menu by selecting
Sync Settings
from the
Output Menu
.
Figure 4-33.
Output Sync Settings Submenu
• For
DVI Sync
,
HDMI Sync
, and
DP Sync,
the available options are:
~ +H+V
~ +H-V
~ -H+V
~ -H-V
The default setting for
DVI Sync
,
HDMI Sync
, and
DP Sync
is
+H+V
.
• For
HD-15 Sync
, the available options are:
~ CVBS / YC / SOG/Y / CSync
~ +H+V
COMP/S-VID ADJ
> HD-15 Pedestal
Off
Comp Pedestal Off
HD-15 SC Phase 0
Comp SC Phase 0
Note
These options apply only to outputs that support composite
and S-Video formats.
OUT SYNC SETTINGS
> DVI Sync
+H+V
HDMI Sync +H+V
DP Sync +H+V
HD-15 Sync SOG /Y
HD-15 SOG/Y Tri-level