ImagePRO-II • User’s Guide
65
4. Menu Orientation
Acquiring an Input Signal
the
Invalid Signal
message.
Please note the following important points regarding
In Auto Acquire
:
•
It is recommended that you turn
Off
In Auto Acquire
in applications where you
have already configured and saved the system’s input setup.
•
If
In Auto Acquire
is
On
and a valid input is selected that does
not
have a saved
input configuration file
associated with it, the system attempts to detect and
acquire the source. This process
may
take a few moments.
•
If
In Auto Acquire
is
Off
the system uses the last-known configuration for each
input, to the extent possible, comparing the input’s timing to the configurations in
the system’s library. These configurations can be custom files or system default
configurations.
~
If the input timing matches a configuration file, either the timing or the
configuration file name appears in the
Status Menu
, and the system
displays the image.
~
If the timings do not match, the
Invalid Signal
message appears in the
Status Menu
.
Note
Most users can leave
In Auto Acquire
on. Advanced users
who know the input video timing parameters may choose to
turn
In Auto Acquire
off and select the parameters manually.
Summary of Contents for ImagePRO-II
