ImagePRO-II • User’s Guide
161
B. Remote Control Protocol
Legacy Remote Commands
filename
: The name of the configuration that is being recalled (not case
sensitive).
ICREC 3 file1 (Recalls Input configuration stored as file1 for input 3.)
f`opq=áå
•
Description
: Reset Input Configuration for the specified input channel.
•
Parameters
:
in
: Input chnl [1-6]
ICRST 1 (Resets Input configuration for input 1)
f`p^s=áå=ÑáäÉå~ãÉ
•
Description
: Saves Input configuration to non-volatile memory.
•
Parameters
:
filename
: The name you give to the configuration when you save it. If
the same input configuration name exists, it will be overwritten.
in
: Input chnl (1-6)
ICSAV 3 file1 (saves Input configuration as FILE1 for input channel 3.)
f`rpb=áå
•
Description
: Query the name of the Input configuration used for the specified
channel.
•
Parameters
:
in
: Input chnl (1-6)
•
Returns
: Name of the Input configuration used (if any)
ICUSE 1 (Lists names of saved input configurations used by channel 1.)
il`hlrq====
•
Description
: Locks and unlocks the front panel
•
Parameter
:
mode
[0 | 1] Off | On
LOCKOUT 1 (Lock the ImagePRO-II front panel from user access.)
ildla
•
Description
: Delete Logo image from non-volatile memory. Selecting Black/
Logo will now display black.
•
Parameters
: None
LOGOD (Delete saved Logo image.)
ildlf
•
Description
: Query the stored Logo image resolution.
•
Parameters
: None
LOGOI (Query Logo resolution.)
Summary of Contents for ImagePRO-II
