102
ImagePRO-II • User’s Guide
5. Web Remote Control Operations
Backing Up and Restoring Data with the Web Interface
On this page, you can:
~
View the ImagePRO-II’s current firmware version, on the
Build Info
line.
~
View the firmware release number, on the
Build
line.
~
See at a glance when a new firmware version is available, and use the
Auto Upgrade
feature to install it.
~
Use the
Upload Firmware
feature to upload a different firmware version.
For more information about the
Auto Upgrade
and
Upload Firmware
features, refer to the
Upgrading Firmware Using the Web Interface
section on page 170, in Appendix C.
On this and the other tabs, you also can monitor the Field Programmable Gate Array
(FPGA) temperature.
_~ÅâáåÖ=ré=~åÇ=oÉëíçêáåÖ=a~í~=ïáíÜ=íÜÉ=tÉÄ=fåíÉêÑ~ÅÉ
You can back up two types of ImagePRO-II files using the Web Interface — system
configurations and logos. The system configuration consists of any custom settings that
you create for the ImagePRO-II. A logo is a stored image that you capture from the
ImagePRO-II. You can download these files to a computer, then restore them for later
reuse.
_~ÅâáåÖ=ré=a~í~=ïáíÜ=íÜÉ=tÉÄ=fåíÉêÑ~ÅÉ
To save the current system configuration, use the following procedure:
1.
On the
Folsom ImagePRO-II
page, select the
Settings Backup and Restore
tab. The page that appears provides two sets of options, one for backing up and
restoring the current system configuration, and one for managing logos.
Note
Because smartphones and tablets limit the file types that you
can upload, you cannot back up configuration files to these
devices.
Summary of Contents for ImagePRO-II
