96
ImagePRO-II • User’s Guide
4. Menu Orientation
Restoring Factory Default Settings
•
The Customer Support telephone number. This number is accessible from 6 a.m.
to 10 p.m. (PST), 7 days per week.
•
The Customer Support web site address.
oÉëíçêáåÖ=c~Åíçêó=aÉÑ~ìäí=pÉííáåÖë
Two options in the
Setup Menu
allow you to restore the ImagePRO-II to its factory default
condition. The following attributes constitute a factory default condition:
•
The
Status Menu
is shown in the display screen.
•
Input 1
is powered on.
•
All other menu buttons and effects buttons are off.
•
The Area of Interest is the default active area for each output.
•
There is no logo stored in memory. If you saved a logo, the logo is
deleted.
•
All custom configurations, views, and formats are deleted.
The
Factory Reset Menu
provides two options for restoring factory default settings:
•
Factory Reset
— If you use this option,
all
of your custom input, output, and
system configuration files are deleted. All custom views and formats are deleted.
If you have a stored logo, it is deleted.
•
Factory Reset, Save IP
— This option performs a factory reset, but retains the IP
address of the ImagePRO-II.
oÉëíçêáåÖ=^ää=c~Åíçêó=pÉííáåÖë
To restore all default settings to the ImagePRO-II, use the following procedure:
1.
Select
Factory Reset
from the
Setup Menu
. The
Factory Reset Menu
appears.
2.
Select
Factory Reset
.
A prompt appears, asking if you want to clear all
configurations, formats, and views.
3.
Press
SEL
. The system turns off, then reboots.
If you press
ESC
to cancel the operation instead, your custom settings remain in
place and you are returned to the
Factory Reset Menu
.
oÉí~áåáåÖ=íÜÉ=fm=^ÇÇêÉëë=tÜÉå=oÉëíçêáåÖ=c~Åíçêó=
pÉííáåÖë
To restore default settings to the ImagePRO-II but retain the unit’s IP address, use the
following procedure:
1.
Select
Factory Reset
from the
Setup Menu
. The
Factory Reset Menu
appears.
2.
Select
Factory Reset, Save IP
. A prompt appears, asking if you want to clear all
configurations, formats, and views.
Note
It is advisable to clear all saved configurations when you use
the ImagePRO-II for the first time, or when returning an
ImagePRO-II from an event.
Summary of Contents for ImagePRO-II
