![background image](http://html.mh-extra.com/html/rak/rak1901/rak1901_quick-start-manual_3498606001.webp)
Documentation Center
RAK1901 Quick Start Guide
Prerequisite
What Do You Need?
Before going through each and every step on using the RAK1901 WisBlock module, make sure to prepare the
necessary items listed below:
Hardware
RAK1901 WisBlock Temperature & Humidity Sensor
USB Cable
RAK19005 WisBlock Sensor Extension Cable (optional)
Li-Ion/LiPo battery (optional)
Solar charger (optional)
Software
Arduino
To add the RAKwireless Core boards on your Arduino Boards Manager, install the
.
Product Configuration
Hardware Setup
WisBlock can integrate this module which makes it easy to build up an environmental temperature and humidity
data acquisition system.
For more information about the RAK1901, refer to the
The RAK1901 module gives information about:
Environment Temperature
Environment Humidity
RAK1901 module can be connected to the sensor's slot of
to communicate with the WisBlock
Core, as shown in Figure 1. It will work on SLOT A to F. Also, always secure the connection of the WisBlock
module by using compatible screws.