Agilent Technologies 1670G Series, Service Manual

Page: 208 / 224

RAM Test
The RAM test checks the video RAM (VRAM), system dynamic RAM (DRAM), and static RAM
memory within the real time clock IC. The microprocessor first performs a write/read in each
memory location of the VRAM. At each VRAM memory location a test pattern is written, read,
and compared. An inverse test pattern is then written, read, and compared. After verifying
correct operation of the VRAM, the System RAM and real time clock RAM are tested in a
similar fashion.
Passing the RAM test implies that the microprocessor can access each VRAM memory
location and that each VRAM memory location can store a logical "1" or a logical "0." If the
VRAM is functioning properly, the logic analyzer can construct a correct, undistorted display.
Passing the RAM test also implies that the memory locations of system RAM can be accessed
by the microprocessor and the data in RAM is intact, and that the memory locations inside the
real time clock IC can store a logical "1" or a logical "0."
Interrupt Test
The Interrupt Test checks the microprocessor interrupt circuitry. With all interrupts disabled
from their source, the microprocessor waits for a short period of time to see if any of the
interrupt lines are asserted. An asserted interrupt line during the wait period signifies
incorrect functioning of the device generating the interrupt or the interrupt circuitry itself.
Those interrupts that can be asserted under software control are exercised to verify
functionality.
Passing the Interrupt Test implies that the interrupt circuitry is functioning properly. Passing
the Interrupt Test also implies that the interrupt generating devices are also functioning
properly and not generating false interrupts. This means that the microprocessor can execute
the operating system code and properly service interrupts generated by pressing a front panel
key or receiving an GPIB or RS-232-C command.
System Tests (SysPV)
The system tests are functional performance verification tests. The following describes the
system tests:
ROM Test
Theory of Operation
System Tests (SysPV)
8–18