ABB Relion REG670, Applications Manual

Page: 733 / 780

23.6.2 Setting guidelines
The summation block receives the three-phase signals from SMAI blocks. The
summation block has several settings.
SummationType : Summation type ( Group 1 + Group 2 , Group 1 - Group 2 , Group 2
- Group 1 or –(Group 1 + Group 2) ).
DFTReference : The reference DFT block ( InternalDFT Ref , DFTRefGrp1 or External
DFT ref ) .
FreqMeasMinVal : The minimum value of the voltage for which the frequency is
calculated, expressed as percent of UBase base voltage setting (for each instance x).
GlobalBaseSel : Selects the global base value group used by the function to define
( IBase ), ( UBase ) and ( SBase ).
23.7 Global base values GBASVAL
23.7.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Global base values GBASVAL - -
23.7.2 Application
Global base values function (GBASVAL) is used to provide global values, common
for all applicable functions within the IED. One set of global values consists of values
for current, voltage and apparent power and it is possible to have twelve different sets.
This is an advantage since all applicable functions in the IED use a single source of
base values. This facilitates consistency throughout the IED and also facilitates a
single point for updating values when necessary.
Each applicable function in the IED has a parameter, GlobalBaseSel , defining one out
of the twelve sets of GBASVAL functions.
23.7.3 Setting guidelines
UBase : Phase-to-phase voltage value to be used as a base value for applicable
functions throughout the IED.
IBase : Phase current value to be used as a base value for applicable functions
throughout the IED.
1MRK 502 071-UEN -
Section 23
Basic IED functions
Generator protection REG670 2.2 IEC and Injection equipment REX060, REX061, REX062 727
Application manual