ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 82 / 789

Chapter 4 Web Configurator
XS3800-28 User’s Guide
82
The following table describes the links in the navigation panel when the Switch is in Networked AV
mode.
Erase
Running-
Configurati
on
This link takes you to a screen where you can reset the configuration to the Zyxel default configu-
ration settings.
Save
Configurati
on
This link takes you to a screen where you can save the current configuration (settings) to a spe-
cific configuration file on the Switch.
Configure
Clone
This link takes you to a screen where you can copy the basic and advanced settings from a
source port to a destination port or ports.
Diagnostic This link takes you to a screen where you can ping IP addresses, run traceroute, test ports and
show the location of the Switch.
Firmware
Upgrade This link takes you to a screen to upload firmware to your Switch.
Reboot System This link takes you to a screen to reboot the Switch without turning the power off.
Service
Register This link takes you to a screen where you can view the status of your service registrations and
upgrade licenses.
Tech-Support This link takes you to a screen where you can download related log reports for issue analysis. Log
reports include CPU history and utilization, crash and memory.
Table 19 Navigation Panel Links (Networked AV Mode)
LINK DESCRIPTION
SUMMARY This screen displays the Switch’s front panel port status, connected ports, used power, Nebula
Cloud Control status, and Networked AV status.
MONITOR
System
Information This link takes you to a screen that displays general system information.
SYSTEM
General Setup This link takes you to a screen where you can configure general identification information
about the Switch.
IP Setup This screen allows you to configure the IP address and subnet mask (necessary for Switch
management) and set up to 64 IP routing domains.
Logins This link takes you to a screen where you can change the system login password, as well as
configure up to four login details.
SNMP This link takes you to screens where you can specify the SNMP version and community
(password) values, configure where to send SNMP traps from the Switch, enable loopguard/
errdisable/poe/linkup/linkdown/lldp/transceiver-ddm/storm-control on the Switch, specify the
types of SNMP traps that should be sent to each SNMP manager, and add/edit user
information.
PORT
Link Aggregation This link takes you to screens where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
Port Setup This screen allows you to configure settings for individual Switch ports.
SWITCHING
Mirroring This link takes you to screens where you can copy traffic from one port or ports to another port
in order that you can examine the traffic from the first port without interference.
Multicast This link takes you to screens where you can view multicast group information, configure various
multicast features like IGMP snooping and filtering profile, and create multicast VLANs.
Table 18 Navigation Panel Links (Standard Mode) (continued)
LINK DESCRIPTION