ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 186 / 789

Chapter 26 SNMP
XS3800-28 User’s Guide
186
26.3 Configure SNMP User
Use this screen to create SNMP users for authentication with managers using SNMP v3 and associate
them to SNMP groups. An SNMP user is an SNMP manager. Click
SYSTEM > SNMP > SNMP User to view the
screen as shown.
Figure 128 SYSTEM > SNMP > SNMP User
The following table describes the labels in this screen.
26.3.1 Add/Edit SNMP User
Use this screen to create SNMP users for authentication with managers using SNMP v3 and associate
them to SNMP groups. An SNMP user is an SNMP manager. Click
Add/Edit , or select an entry and click
Add/Edit in the SYSTEM > SNMP > SNMP User screen to view the screen.
Port Enter the port number upon which the manager listens for SNMP traps.
Username Enter the user name to be sent to the SNMP manager along with the SNMP v3 trap.
This user name must match an existing account on the Switch (configured in the SYSTEM >
SNMP > SNMP User screen).
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 70 SYSTEM > SNMP (continued)
LABEL DESCRIPTION
Table 71 SYSTEM > SNMP > SNMP User
LABEL DESCRIPTION
Index This is a read-only number identifying a login account on the Switch.
Username This field displays the user name of a login account on the Switch.
Security Level This field displays whether you want to implement authentication and/or encryption for SNMP
communication with this user.
Authentication This field displays the authentication algorithm used for SNMP communication with this user.
Privacy This field displays the encryption method used for SNMP communication with this user.
Group This field displays the SNMP group to which this user belongs.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.