manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 698 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 698

Chapter 88 Networked AV Mode

XS3800-28 User’s Guide

698

The following table describes the labels in this screen.

Enable 

Nebula Control Center (NCC) Discovery

 to turn on NCC discovery on the Switch. If the Switch 

has Internet access and has been registered in the NCC, it will go into cloud management mode.

Disable 

Nebula Control Center (NCC) Discovery

 to turn off NCC discovery on the Switch. The Switch will 

NOT discover the NCC and remain in standalone mode.

This screen has a QR code containing the Switch’s serial number and Registration MAC address for 
handy NCC registration of the Switch using the Nebula Mobile app. First, download the app from the 
Google Play store for Android devices or the App Store for iOS devices and create an organization and 
site. Open the Nebula Mobile app and follow the wizard to scan the 

Register Device

 QR code to register 

the Switch on NCC.

88.10  General Setup

Use this screen to configure general settings such as the system name and time. Click 

SYSTEM

 > 

General 

Setup 

in the navigation panel to display the screen as shown.

Table 372   SYSTEM > Cloud Management

LABEL

DESCRIPTION

Nebula Control 
Center (NCC) 
Discovery

Enable the switch button to turn on Nebula Control Center (NCC) discovery on the Switch.

This field displays:

• The Switch Internet connection status.
• The connection status between the Switch and NCC.
• The Switch registration status on NCC.

Mouse over the circles to display detailed information.

To pass your Switch management to NCC, first make sure your Switch is connected to the 
Internet. Then go to NCC and register your Switch.

1. 

Internet

Green – The Switch is connected to the Internet.

Orange – The Switch is not connected to the Internet.

2. 

Nebula

Green – The Switch is connected to NCC.

Orange – The Switch is not connected to NCC.

3. 

Registration

Green – The Switch is registered on NCC.

Gray – The Switch is not registered on NCC.

Note: All circles will gray out if you disable Nebula Discovery.

Connection 
Status

This table displays the NCC connection status information.

Use the status logs in the 

Internet

, 

Nebula

, and 

Registration

 fields for connection 

troubleshooting.

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов