manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 741 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 741

 Chapter 88 Networked AV Mode

XS3800-28 User’s Guide

741

Figure 591   

SECURITY > Storm Control

The following table describes the labels in this screen.

88.39  MAINTENANCE

This section explains how to configure the screens that let you maintain the firmware and configuration 
files.

Table 404   SECURITY > Storm Control

LABEL

DESCRIPTION

Active

Enable the switch button

 

to enable traffic storm control on the Switch. Disable the switch 

button to disable this feature.

Port

This field displays the port number.

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first to set 
the common settings and then make adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you make them.

Broadcast (pkt/s) Select this option and specify how many broadcast packets the port receives per second.

Multicast (pkt/s)

Select this option and specify how many multicast packets the port receives per second.

DLF (pkt/s)

Select this option and specify how many destination lookup failure (DLF) packets the port 
receives per second.

Apply

Click 

Apply

 to save your changes to the Switch’s run-time memory. The Switch loses these 

changes if it is turned off or loses power, so use the 

Save

 link on the top navigation panel to 

save your changes to the non-volatile memory when you are done configuring.

Cancel

Click 

Cancel 

to reset the fields.

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов