manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 688 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 688

Chapter 87 MAINTENANCE

XS3800-28 User’s Guide

688

Figure 550   

MAINTENANCE > Service Register

The following table describes the labels in this screen.

87.18  Tech-Support

The Tech-Support feature is a log enhancement tool that logs useful information such as CPU utilization 
history, memory and Mbuf (Memory Buffer) log and crash reports for issue analysis by customer support 
should you have difficulty with your Switch. The Tech Support menu eases your effort in obtaining reports 
and it is also available in CLI command by typing “Show tech-support” command.

Click 

MAINTENANCE

 > 

Tech-Support

 to see the following screen.

Table 368   MAINTENANCE > Service Register

LABEL

DESCRIPTION

Service

This lists the name of the service that is available on the Switch.

Status

This field displays whether the service license is enabled at myZyxel (

Licensed

) or not (

Not 

Licensed

).

Type

Trial

 indicates a 30-day trial service license is currently applied on the Switch.

Standard

 indicates a service license is registered at www.myzyxel.com.

N/A

 is displayed if the service license is not registered.

Expiration

This field displays the amount of time remaining before your trial license expires.

Note: You can enable a standard license at myZyxel if the trial license expires.

Update

Click this button to renew service license information (such as the registration status and expiration 
day).

Note: It is recommended you use this button after you register for a new service.

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов