ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 79 / 789

XS3800-28 User’s Guide
79
Static MAC For-
warding This link takes you to a screen where you can configure static MAC addresses for a port. These
static MAC addresses do not age out.
VLAN Click the link to unfold the following sub-link menu.
VLAN
Status
This link takes you to a screen where you can view and search all VLAN groups.
VLAN Setup This link takes you to screens where you can:
• configure port-based or 802.1Q VLAN.
• view detailed port settings and status of the VLAN group.
• configure and view 802.1Q VLAN parameters for the Switch.
• configure the static VLAN settings on a port.
Subnet
Based
VLAN Setup
This link takes you to a screen where you can set up VLANs that allow you to group traffic into log-
ical VLANs based on the source IP subnet you specify.
Protocol
Based
VLAN Setup
This link takes you to a screen where you can set up VLANs that allow you to group traffic into log-
ical VLANs based on the protocol you specify.
Voice
VLAN Setup
This link takes you to a screen where you can set up VLANs that allow you to group voice traffic
with defined priority and enable the Switch port to carry the voice traffic separately from data
traffic to ensure the sound quality does NOT deteriorate.
MAC Based
VLAN Setup
This link takes you to a screen where you can set up VLANs that allow you to group untagged
packets into logical VLANs based on the source MAC address of the packet. This eliminates the
need to reconfigure the Switch when you change ports. The Switch will forward the packets
based on the source MAC address you set up previously.
Vendor ID
Based
VLAN Setup
This link takes you to screens where you can set up VLANs that allow you to group untagged
packets into logical VLANs based on the source MAC address of the packet. You can specify a
mask for the MAC address to create a MAC address filter and enter a weight to set the VLAN
rule’s priority.
VLAN Isolation This link takes you to a screen where you can block traffic between ports in a VLAN on the Switch.
VLAN Mapping This link takes you to screens where you can configure VLAN mapping settings on the Switch.
VLAN Stacking This link takes you to screens where you can activate and configure VLAN stacking.
WoL Relay This link takes you to a screen where you can configure settings on Wake on LAN Relay.
NETWORKING
ARP Setup Click the link to unfold the following sub-link menu.
ARP
Learning
This link takes you to a screen where you can configure ARP learning mode on a per-port basis.
Static ARP This link takes you to a screen where you can create static ARP entries which do not age out.
DHCP Click the link to unfold the following sub-link menu.
DHCPv4
Relay
This link takes you to screens where you can view DHCPv4 relay status, mode, and configure
DHCPv4 relay settings.
DHCPv4
Server
This link takes you to screens where you can view DHCPv4 server status and configure the Switch
as a DHCPv4 server.
DHCPv6
Relay
This link takes you to a screen where you can enable and configure DHCPv6 relay.
DHCPv6
Server
This link takes you to screens where you can configure DHCPv6 and DNS server settings on the
Switch.
DHCP
Server
Guard
This link takes you to a screen where you can specify whether ports are trusted or untrusted ports
for DHCP packets.
DVMRP This link takes you to a screen where you can configure the DVMRP (Distance Vector Multicast
Routing Protocol) settings.
IGMP This link takes you to a screen where you can enable IGMP (Internet Group Management Proto-
col) on the Switch and configure the Switch as a multicast router.
Table 18 Navigation Panel Links (Standard Mode) (continued)
LINK DESCRIPTION