manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 149 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 149

 Chapter 20 Cloud Management

XS3800-28 User’s Guide

149

The following table describes the labels in this screen.

Cloud Management Mode

Enable the switch button to turn on NCC discovery on the Switch. If the Switch has Internet access and 
has been registered on the NCC, it will automatically go into cloud management mode. Follow the 
steps to register your Switch on NCC:

1

Download the Nebula Mobile App

First, download the app from the Google Play store for Android devices or the App Store for iOS devices 
and create an organization and site.

You can scan an app store QR code to open the app installation page on the app store.

2

Scan the Device QR code

The 

Register Device

 QR code in this screen contains the Switch’s serial number and the registration MAC 

address for handy NCC registration of the Switch using the Nebula Mobile app.

Follow the wizard in the Nebula Mobile app to scan the QR code to register the Switch on NCC and add 
the Switch into a site.

Table 39   SYSTEM > Cloud Management

LABEL

DESCRIPTION

Nebula Control 
Center (NCC) 
Discovery

Enable the switch button to turn on Nebula Control Center (NCC) discovery on the Switch.

This field displays: 

• The Switch Internet connection status.
• The connection status between the Switch and NCC.
• The Switch registration status on NCC.

To pass your Switch management to NCC, first make sure your Switch is connected to the 
Internet. Then go to NCC and register your Switch.

1. Internet

Green – The Switch is connected to the Internet.

Orange – The Switch is not connected to the Internet.

2. Nebula

Green – The Switch is connected to NCC.

Orange – The Switch is not connected to NCC.

3. Registration

Green – The Switch is registered on NCC.

Gray – The Switch is not registered on NCC.

Note: All circles will gray out if you disable Nebula Discovery.

Connection 
Status

This table displays the NCC connection status information.

Use the status logs in the 

Internet

, 

Nebula

, and 

Registration

 fields for connection 

troubleshooting.

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов