ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 78 / 789

Chapter 4 Web Configurator
XS3800-28 User’s Guide
78
MAC Pinning This link takes you to a screen where you can set specific ports to have priority over other ports in
MAC address learning.
Mirroring Click the link to unfold the following sub-link menu.
Mirroring This link take you to a screen where you can copy traffic from one port or ports to another port in
order to examine the traffic from the first port without interference.
RMirror The link takes you to screens where you can view and configure a remote port mirroring (RMirror)
VLAN through which the mirrored traffic is forwarded.
Multicast Click the link to unfold the following sub-link menu.
IPv4
Multicast
This link takes you to screen where you can configure various IPv4 multicast features, IGMP snoop-
ing, filtering and create multicast VLANs.
IPv6
Multicast
This link takes you to screen where you can configure various IPv6 multicast features, MLD snoop-
ing-proxy, filtering and create multicast VLANs.
MVR This link takes you to screens where you can create multicast VLANs and select the receiver ports
and a source port for each multicast VLAN.
Static
Multicast
Forwarding
By MAC
This link takes you to a screen where you can configure static multicast MAC addresses for port(s).
These static multicast MAC addresses do not age out.
NLB This link takes you to screens where you can configure to which MAC addresses and ports the
Switch should forward the incoming NLB traffic, and map the IP address to the MAC address of a
cluster for layer-3 forwarding.
PPPoE Interme-
diate Agent This link takes you to screens where you can enable PPPoE (Point-to-Point Protocol over Ethernet)
Intermediate Agent and configure per-port, per-port-per-VLAN settings.
Private VLAN This link takes you to a screen where you can block traffic between ports in a VLAN on the Switch.
QoS Click the link to unfold the following sub-link menu.
Diffserv This link takes you to screens where you can enable DiffServ, configure marking rules and set
DSCP-to-IEEE802.1p mappings.
Queuing
Method
This link takes you to a screen where you can set priorities for the queues of the Switch. This distrib-
utes bandwidth across the different traffic queues.
Priority
Queue
This link takes you to a screen where you can set priority tags for different traffic types and specify
the priority levels.
Bandwidth
Control
This link takes you to a screen where you can cap the maximum bandwidth allowed on a port.
sFlow This link takes you to screens where you can configure sFlow settings on the Switch.
Spanning Tree
Protocol Click the link to unfold the following sub-link menu.
Spanning
Tree
Protocol
Status
This link takes you to a screen where you can view the STP status in the different STP modes (RSTP,
MRSTP or MSTP) you can configure on the Switch.
Spanning
Tree Setup
This link takes you to a screen where you can activate one of the STP modes (RSTP, MRSTP or
MSTP) on the Switch.
RSTP This link takes you to a screen where you can configure the RSTP (Rapid Spanning Tree Protocol)
settings on the Switch.
MRSTP This link takes you to a screen where you can configure the MRSTP (Multiple Rapid Spanning Tree
Protocol) settings on the Switch.
MSTP This link takes you to a screen where you can configure the MSTP (Multiple Spanning Tree Proto-
col) settings on the Switch.
Static MAC Fil-
tering This link takes you to a screen to set up static MAC filtering rules.
Table 18 Navigation Panel Links (Standard Mode) (continued)
LINK DESCRIPTION