manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 313 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 313

 Chapter 44 Multicast

XS3800-28 User’s Guide

313

44.4  IGMP Snooping VLAN

Click

 SWITCHING

 > 

Multicast

 > 

IPv4 Multicast

 > 

IGMP Snooping VLAN 

to display the screen as shown. See 

IGMP Snooping and VLANs on page 306

 for more information on IGMP Snooping VLAN.

Note: You can perform IGMP snooping on up to 16 VLANs.

Figure 224   

SWITCHING > Multicast > IPv4 Multicast > IGMP Snooping VLAN

IGMP Querier 
Mode

The Switch treats an IGMP query port as being connected to an IGMP multicast router (or 
server). The Switch forwards IGMP join or leave packets to an IGMP query port.

Select 

Auto

 to have the Switch use the port as an IGMP query port if the port receives IGMP 

query packets.

Select 

Fixed

 to have the Switch always use the port as an IGMP query port. Select this when 

you connect an IGMP multicast server to the port.

Select 

Edge

 to stop the Switch from using the port as an IGMP query port. The Switch will not 

keep any record of an IGMP router being connected to this port. The Switch does not forward 
IGMP join or leave packets to this port.

Apply

Click 

Apply

 to save your changes to the Switch’s run-time memory. The Switch loses these 

changes if it is turned off or loses power, so use the 

Save

 link on the top navigation panel to 

save your changes to the non-volatile memory when you are done configuring.

Cancel

Click 

Cancel

 to begin configuring this screen afresh.

Table 134   SWITCHING > Multicast > IPv4 Multicast > IGMP Snooping (continued)

LABEL

DESCRIPTION

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов