ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 103 / 789

Chapter 6 Tutorials
XS3800-28 User’s Guide
103
Figure 58 Tutorial: Enable Auto Configuration
3
Go to the SYSTEM > IP Setup > IP Setup screen. Click the Add/Edit button in the IP Interface table to open
the configuration screen.
4
Select DHCP Client .
5
If you want to load the auto configuration file with DHCP option 60 enabled and a Vendor Class
Identifier assigned when you reboot the Switch, follow the instruction below. Otherwise, skip this step. In
the
SYSTEM > IP Setup > IP Setup > Add/Edit screen, select the check box in the Option-60 field. Enter a
Vendor Class Identifier in the Class-ID field, and specify the VLAN interface in the VID field. In this
example, we use “ZyxelCorp” and VID 1. Click Apply .
Figure 59 Tutorial: Enable DHCP Client & Option 60
6
You need to save the current configuration in a configuration file, so the Switch will load the auto
configuration file from the TFTP server automatically when rebooting. Go to the
MAINTENANCE >
Configuration > Save Configuration screen. Click the Config 1 , Config 2 , or Custom Default button.
7
Click the same button in the MAINTENANCE > Reboot System screen to reboot the Switch, and load the
auto configuration setting as configured before. For example, if you save the auto configuration setting
to
Config 1 , you need to click the Config 1 button in the Reboot System screen.