manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 323 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 323

 Chapter 44 Multicast

XS3800-28 User’s Guide

323

44.10  MLD Snooping-proxy Filtering

Use this screen to configure the Switch’s MLD filtering settings. Click the 

SWITCHING

 > 

Multicast

 > 

IPv6 

Multicast

 > 

Filtering 

screen to display the screen as shown.

Leave Mode

This is configurable only when you select 

Downstream

 in the previous 

Port Role

 field.

Select the leave mode for the specified downstream ports in this VLAN.

This specifies whether the Switch removes an MLD snooping membership entry (learned 
on a downstream port) immediately (

Immediate

) or wait for an MLD report before the 

leave timeout (

Normal

) or fast leave timeout (

Fast

) when an MLD leave message is 

received on this port from a host.

Leave Timeout

Enter the MLD snooping normal leave timeout (in milliseconds) the Switch uses to update 
the forwarding table for the specified downstream ports.

This defines how many seconds the Switch waits for an MLD report before removing an 
MLD snooping membership entry (learned on a downstream port) when an MLD Done 
message is received on this port from a host.

Fast Leave Timeout

Enter the fast leave timeout (in milliseconds) for the specified downstream ports.

This defines how many seconds the Switch waits for an MLD report before removing an 
MLD snooping membership entry (learned on a downstream port) when an MLD Done 
message is received on this port from a host.

Apply

Click 

Apply

 to save your changes to the Switch’s run-time memory. The Switch loses 

these changes if it is turned off or loses power, so use the 

Save

 link on the top navigation 

panel to save your changes to the non-volatile memory when you are done configuring.

Cancel

Click 

Cancel

 to reset the fields to your previous configuration.

Table 144   SWITCHING > Multicast > IPv6 Multicast > Port Role Setting (continued)

LABEL

DESCRIPTION

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов