manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 156 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 156

Chapter 22 Interface Setup

XS3800-28 User’s Guide

156

22.2.1  Add/Edit Interfaces

Click 

Add/Edit

, or select an entry and click 

Add/Edit

 in the 

SYSTEM

 > 

Interface Setup

 screen to display 

the configuration screen.

Figure 99   

SYSTEM > Interface Setup > Add/Edit

The following table describes the labels in this screen.

Add/Edit

Click 

Add/Edit

 to add a new interface or edit a selected one.

Delete

Click 

Delete

 to remove the selected interfaces.

Table 42   SYSTEM > Interface Setup (continued)

LABEL

DESCRIPTION

Table 43   SYSTEM > Interface Setup > Add/Edit

LABEL

DESCRIPTION

Interface Type

Select the type of interface you want to create. At the time of writing, the Switch supports the 
following interface types:

• VLAN interface for IPv6
• IPv4 loopback interface.

Interface ID

Specify a unique identification number (from 1 to 4094) for the VLAN interface or a unique 
identification number (from 0 to 2) for the loopback interface.

To have IPv6 function properly, you should configure a static VLAN with the same ID number in the 

SWITCHING

 > 

VLAN

 screens.

Apply

Click 

Apply

 to save your changes to the Switch’s run-time memory. The Switch loses these 

changes if it is turned off or loses power, so use the 

Save

 link on the top navigation panel to save 

your changes to the non-volatile memory when you are done configuring.

Clear

Click 

Clear

 to clear the fields to the factory defaults.

Cancel

Click 

Cancel

 to not save the configuration you make and return to the last screen.

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов