manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 87

11-49

IM 701210-06E

Waveform Analysis/Search

11

File Name When Action Is Set to Save to File or Image

The file is saved using Numbering under the File menu or the Image Save menu.

For details, see section 13.11, “Saving the Screen Image Data” or section 13.7, “Saving/

Loading Waveform Data.”

Notes When Performing GO/NO-GO Determination

• The determination results (the number of determinations and failures) are displayed.

Determination count Fail count

XXOOOO------------

Indicates whether the condition of 
each determination waveform 1 to 16 is met.

In this example, the condition of determination 
waveform 1 is not met and the condition of 
determination waveform 3 is met.

O: The specified condition is met
X: The specified condition is not met
-: Determination waveform for which a 
condition is not specified

1,2,3, . . . . . . . . . ,16: Determination waveform

• All keys other than START/STOP and the Abort soft key are disabled during the

determination.  (When Remote is ON, the Exec (One Shot) soft key is also valid.)

• When GO/NO-GO determination is executed, the trigger mode is automatically

changed to Single.

• Determination is not possible when the acquisition mode is set to Average.

• Determination is not possible when realtime recording is in progress or when

waveforms are being acquired using the dual capture function.

• If any of the following actions is activated while the DL750/DL750P is being accessed

through the FTP server function or the Web server function, the action is not executed

until the access is finished.

Printing/saving of the screen image data and saving of the waveform data

Notes When Action Is Set to Save to File or Image Save

• Do not specify the root directory of the medium as the save destination directory.

(Only up to 512 files can be saved to the root directory of a medium that has been

formatted using the DL750/DL750P.)

• The maximum number of files that can be created in a single directory is 5000.  Do

not place files in the save destination folder before starting GO/NO-GO determination.

• If you select Save to File and Image Save simultaneously, separate the folders

specified by the FILE menu and the IMAGE SAVE menu.

• If you selected Numbering for the file name assignment method (Auto Naming) in the

FILE menu and the IMAGE SAVE menu, the creation of files takes an extended

period when the number of saved files becomes large.  When creating more than

2000 files, select Date for Auto Naming.

Note

The zone waveforms you create can be stored as setup data on a storage medium such as a
floppy disk, Zip disk, PC card, or internal hard disk (optional).

11.8 Performing GO/NO-GO Determination Using Zones

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды