manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 264

16-53

IM 701210-06E

Ethernet Interface (Optional)

16

Explanation

Network Drive

When the instrument is registered as a network drive, the files on the DL750/DL750P

drive can be view using a software application running on a PC.

Note

•

The DL750/DL750P can be mapped as a network drive only on Windows XP.

•

When manipulating files using the network drive function, do not perform other network
functions such as the FTP client/server function or Web server function.  If you do, the
DL750/DL750P or the PC may become unstable.

•

Do not change the contents of the DL750/DL750P drive (including the contents of the
drives connected via the SCSI) from the PC. Reading the contents of the drive is allowed.

•

Never perform the following operations.
•

Delete files on the DL750/DL750P drive from the PC.

•

Add files on the DL750/DL750P drive from the PC.

•

Change the directory structure of the DL750/DL750P drive from the PC.

•

If you attempt to move a large file from the PC to the DL750/DL750P, the file may be lost
due to the limitations of Windows.

•

You cannot manipulate the files simultaneously from multiple PCs.

•

You cannot view a directory containing 1000 or more files.

•

You cannot use the WebDAV function simultaneously with the Web server function.

Available Characters

This function uses the Windows WebDAV client function and the instrument’s WebDAV

server function . The characters that can be used with the WebDAV server function on

this instrument are as follows.

0 to 9

A to Z, a to z

%, (, ) , _

Therefore, please make note of the following.

• Files and folders whose names contain characters other than the ones indicated

above cannot be saved on the DL750/DL750P’s drive.  Also, these files cannot be

copied or moved.

• Files in the instrument’ drive containing characters other than those listed above are

not displayed in the file list using WebDAV.

Also, these files and folders are not taken into account in the calculation of used disk

space.  Therefore, the actual amount of used disk space is different from the

calculated amount of space.

File Information

If you copy files or folders from the instrument’s drive to a Windows local disk, the

creation date and time of the file or folder changes to that of the date and time copied.

Likewise if you copy files or folders from a Windows local disk to the instrument’s drive,

the creation and modified dates and times of the file or folder changes to that of the date

and time when copied.

16.11 Using the Instrument as a Windows Network Drive (Version 4.01 or Later)

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды