manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 104

12-10

IM 701210-06E

Printing Using Normal Output Format

Comment

A comment string of up to 20 characters can be printed at the top section of the print

area.  The comment setting is linked with the PRINT menu > Comment setting.

Fine Print, Zoom Print, and A4 Print

Print Magnification: Print Mag

Set the print magnification only during fine print and zoom print.  The selectable range

varies depending on the T/div setting and record length.

Print Range: Time Range1/Time Range2

Set the print range only during fine print.  Set the print range in the range of –5 divisions

to 5 divisions.

Zoom Box Z2: Z2 Mag/Z2 Position

Set zoom box Z2 only during zoom printing. The zoom box Z2 setting is linked to the

ZOOM menu setting. For details such as the selectable range, see section 8.5.

Print Setup

Format

Select the number of divisions of the print area when printing on the built-in printer.

Single: 1 division

Quad:

4 divisions

Dual:

2 divisions

Octal:

8 divisions

Triad:

3 divisions

Hexadecimal: 16 divisions

The format setting is linked with the DISPLAY menu > Format setting.

Extra Area

The extra area can be set only when the format is set to Single, Dual, Triad, or Quad.

 • When the Format Is Single

If extra area is turned ON, the top 16 cm of the print area (20 cm) is used to print

waveforms, and the remaining 4 cm is used to print waveform information (extra

area). Annotations (see the next page) and logic waveforms are printed in the extra

area. The default setting is OFF.

 • When the Format is Dual, Triad, or Quad

If extra area is turned ON, the area below each of the divided waveform recording

area is used to print the waveform information (extra area). If extra area is turned

OFF, the extra area between each waveform recording area disappears. The

magnification of the vertical axis of each waveform recording area is adjusted

automatically according to the paper size and printed. The default setting is ON.

12.2  Printing on the Built-in Printer

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды