manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 292

19-4

IM 701210-06E

19.5 Function

Vertical/Horizontal Axis Settings

Item

Specifications

Channel ON/OFF

Independently turn ON/OFF CH1 to CH16, DSP1 to DSP6, LOGIC A, LOGIC B, and EVENT.

ALL CH menu

Set all channels while displaying waveforms.  Operation using the USB keyboard is possible.

Vertical axis expansion/

Expand or reduce the vertical axis for each channel.

reduction

Variable

Upper/Lower limit scaling when variable is ON.

Input filter

Set for each channel.

Vertical position setting

Waveforms can be moved vertically in the range of 

±

5 div from the center of the waveform display

frame.

Linear scaling

Set AX+B mode or P1-P2 mode independently for CH1 to CH16.

Roll mode

The roll mode is enabled when the trigger mode is set to auto, auto-level, single, or log, and the time
axis setting is greater than or equal to 100 ms/div.

Analysis

Item

Specifications

Search & zoom function

Search for, then expand and display a portion of the displayed waveform.
Choose from the following two search methods.

Edge:

Counts the rising and falling edges and automatically searches an arbitrary edge

Auto scroll:

Automatically scrolls the zoom position.

History search function

Search for and display waveforms from the history memory that satisfy specified conditions.

Zone search:

Set an area on the screen, then extract and display only those waveforms that pass through the
area (Pass mode), or do not pass through the area (By Pass mode).

Cursor measurement

The following cursors are selectable.
Horizontal, Vertical, H&V (only during X-Y waveform display), Degree (only during T-Y waveform
display), and Marker

Automated measurement of waveform parameters

Capable of performing automated measurement of waveform parameters.  Automated
measurement of waveform parameters within one period (P-P through Int2XY).
Up to 24 items can be displayed.
P-P, Amp, Max, Min, High, Low, Avg, Mid, Rms, Sdev, +OvrShoot, –OvrShoot, Rise, Fall, Freq,
Period, +Width, –Width, Duty, Pulse, Burst1, Burst2, AvgFreq, AvgPeriod, Int1TY, Int2TY, Int1XY,
Int2XY, Delay (between channels)

Statistical processing

Applicable items: Automated measured values of waveform parameters described above.
Statistics:

Max, Min, Avg, Sdv, and Cnt

Maximum number of cycles:

48000 cycles (when the number of parameters is 1)

Maximum total number of parameters: 48000 (total number of results)
Maximum measurement range:

10 MW

Normal statistical processing

Performs statistical processing on all acquired waveforms while acquiring waveforms.

Cycle statistical processing

Performs statistical processing per cycle (cycle statistical computation).  Extracts a periodic waveform
(cycle) from the acquisition memory and automatically calculates waveform parameters per cycle.

Statistical processing of the history data

Performs automated measurement of waveform parameters on the waveform that is acquired using
the history memory function and performs statistical processing.
Statistical processing is performed from the oldest data.

Computation (standard)

Operators: +, –, 

×

, /, binary computation, phase shift, and power spectrum

User-defined

Equations obtained by arbitrarily combining the following operators.

computation(optional)

ABS, SQRT, LOG, EXP, NEG, SIN, COS, TAN, ATAN, PH, DIF, DDIF, INTG, IINTG, BIN, P2, P3,
F1, F2, FV, PWHH, PWHL, PWLH, PWLL, PWXX, DUTYH, DUTYL, FILT1, FILT2, HLBT, MEAN,
LS-, PS-, PSD-,  CS-, TF-, CH-, MAG, LOGMAG, PHASE, REAL, IMAG

Phase shift

Monitor waveforms by shifting the phase of CH1 to CH16.  Computation is performed on the phase-
shifted result.

GO/NO-GO determination The following two types of GO/NO-GO determination are available

• Determination using zones on the screen
• Determination using the result of the automated measurement of waveform parameters
Specify an action for GO or NO-GO result.  Possible actions are screen image data output,
waveform data storage, buzzer notification, and e-mail transmission.

1

1.

When the Ethernet interface option is installed

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды