manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 202

15-11

IM 701210-06E

Using the DSP Channel (Optional)

15

15.4 Performing Differentiation and Integration (DSP Channels)

Setting Value/Div

7.

Turn the V/DIV knob to set the Value/Div value.

You can also set Value/Div by pressing the 

Value/Div 

soft key and turning the

jog shuttle

.

Note

There are 123 (selectable range: 10.00E–21 [Value/Div] to 500.0E+18 [Value/Div]) different
Value/Div settings.  You set the Value/Div using 1-2-5 steps similar to the V/div setting.

Automatically Selecting the Optimum Value/Div Setting

8.

Press the 

Optimize Value/Div 

soft key.  The optimum Value/Div setting is

automatically selected by referring to the range of the computation channel and

displayed.

Note

•

The Optimize Value/Div soft key appears only when Variable is OFF.

•

The operation using the Optimize Value/Div soft key selects the optimum Value/Div setting
by referring to the range of the computed channel.  It does not select the optimum Value/
Div setting for the output waveform after computation.  For easy viewing of the waveform
after computation, select the approximate range using Optimize Value/Div, and then use
the V/DIV knob or Value/Div soft key to adjust to the optimum range.

Zooming in on the Waveform

The procedure of “Zooming in or out Vertically by Setting the Zoom Rate” and “Zooming/

Expanding Vertically According to the Upper and Lower Limits of the Display Range” is

the same as the procedure described in section 15.2, “Performing Addition, Subtraction,

Multiplication, and Division (DSP Channels).”  See page 15-4.

Setting the Waveform Label

The procedure is the same as the procedure described in section 15.2, “Performing

Addition, Subtraction, Multiplication, and Division (DSP Channels).”  See page 15-4.

Setting the Unit

The procedure is the same as the procedure described in section 15.2, “Performing

Addition, Subtraction, Multiplication, and Division (DSP Channels).”  See page 15-4.

Variable OFF

Variable ON

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды