manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 291

19-3

IM 701210-06E

Specifications

19

19.4 Display

Item

Specifications

Display

10.4" color TFT LCD monitor

Display screen size

211.2 

×

 158.4 mm

Display resolution

1

SVGA 800

×

600 dots

Display resolution of the

650

×

512 (normal waveform display) or 750

×

512 (wide waveform display) selectable

waveform display

Display format

Windows:

Zoom: MAIN/MAIN&Z1/MAIN&Z2/MAIN&Z1&Z2/Z1only/Z2only Z1&Z2
X-Y:

TY/XY/TY&XY

Maximum display update

30 times/s when a single waveform is displayed

rate

1.

Liquid crystal display may include few defective pixels.(Within 5 ppm (6 points) of the total number of pixels (including RGB)
The LCD is a high technology device made up of more than 1.44 million pixels There may be pixels that do not turn ON or
those that remain ON at all times.  However, these cases are not malfunction.

19.5 Function

Acquisition and Display

Item

Specifications

Acquisition mode

Normal:

Normal waveform acquisition

Envelope:

Maximum sampling rate regardless of the T/div setting, holds the peak value

Averaging:

Average count 2 to 65536 (2

n

 steps)

Box average:

Increase the A/D resolution up to 4 bits (16 bits max.)

Record length

1 kW, 2.5 kW, 5 kW, 10 kW, 25 kW, 50 kW, 100 kW, 250 kW, 500 kW, 1 MW, 2.5 MW, 5 MW, 10
MW, 25 MW, 50 MW, 100 MW (/M1, /M2, or /M3 option), 250 MW (/M1, /M2, or /M3 option), 500
MW (/M2 or /M3 option), 1000 MW (/M3 option)

Zoom

Expand the displayed waveform along the time axis (up two locations using separate zoom rates)

Display format

1, 2, 3, 4, 8, 16 analog waveform windows

Display interpolation

Display samples using dot display, sine interpolation, or linear interpolation.

Graticule

Select from three graticule types.

Auxiliary display ON/OFF

Turn ON/OFF scale values, waveform labels, extra window, level indicator/numeric display.

X-Y display

Select the X axis and Y axis from CH1 to CH16, DSP1 to DSP6, MATH1 to MATH8 (up to 4)

Accumulation

Accumulates waveforms on the display (persistence mode)

Snapshot

Retains the current displayed waveform on the screen.  Snapshot waveforms can be saved and
loaded.

Clear trace

Clears the displayed waveform.

Dual capture

Performs data acquisition on the same waveform at two different sampling rates.

Main waveform

Maximum sample rate:

100 kHz (roll mode region)

(low speed)

Maximum memory length: 100 MW

Sub waveform

Maximum sample rate:

10 MS/s

(high speed)

Maximum memory length: 10 kW (fixed)

Realtime hard disk

Maximum sample rate:

100 kS/s (for 1 CH) max.

recording

Capacity:

Up to 1 GW per operation

Action count:

Select Single or Continue.
If Continue is selected, set the count in the range of 2 to 128.

Features:

Restore process not required.  Saved to a format that can be loaded
directly.

Voice memo

Records a voice as a memo while waveforms are being acquired (when in roll mode display).  The
recorded voice memo can be saved along with the waveform data.  Maximum record time is 100 s.

Voice comment

Saves screen image data by attaching a voice comment (separate data from screen image data).
The maximum length of voice comment that can be attached to a single screen image data is 10 s.
Plays the voice comment from the File List window.

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды