manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 181

13-68

IM 701210-06E

Connecting the DL750/DL750P and the PC

1.

Turn OFF the DL750/DL750P and the PC.

2.

Connect the DL750/DL750P and the PC with the SCSI cable.

3.

Turn ON the DL750/DL750P first.

4.

After the DL750/DL750P boots up completely, check that the connected SCSI

device operates on the DL750/DL750P.

5.

Turn ON the PC.

DL750/DL750P

When connected to a PC running Windows Me

Precautions to Be Taken When Connecting

• Drive

If you format the internal hard disk using the DL750/DL750P, it is formatted into two or

three partitions.  For example, the PC recognizes these drives as F: and G:.  The

drive with the smaller drive letter (drive F: in the above example) is the area dedicated

to the realtime recording.  Other drives are used to store setup data, waveform data,

screen image data, etc.

The drive for realtime recording is used as a working area for the realtime

recording within the DL750/DL750P.  Never delete files, copy and paste files,

and add new files on this drive from the PC.  Otherwise, the realtime recording

may not operate properly.

Other drives are used to save other types of data such as waveforms that can be

recalled later.  The waveforms that can be used on the PC are saved on this drive.

• Newly Created File During Connection

If a file is created with the DL750/DL750P while it is connected to the PC, the new file

is not recognized by the PC.

If the PC is running Windows 98/98 SE/Me, the following procedures allow the files to

be recognized.

1.

On Windows 98/98 SE/Me, open the “Settings” tab in the properties dialog box

for the connected drive, and check the Removable

1

 box.

2.

Reboot the PC.

3.

After creating a new file on the DL750/DL750P, select “Refresh” in the file list

window (Explorer, for example).

1. Select “My Computer > Control Panel > System > Device Manager > Disk Drive” and select

the relevant drive from the drive list.  The “Removable” check box is located in the
“Properties” dialog box under the “Settings” tab.  You can check the drive number under
“Current Drive.”  Windows 2000/XP does not have this function.

• Refreshing Files (Windows 98, 98 SE, and Me)

If a file is updated on the DL750/DL750P, the update will be recognized by selecting

“Refresh” in the file list window of the PC (Explorer, for example).

13.18  Connecting a PC to the DL750 via SCSI

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды