manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 170

13-57

IM 701210-06E

Saving and Loading Data

13

Selecting the File to Be Deleted One at a Time

8.

Turn the 

jog shuttle

 to select the file.

9.

Press the 

Set/Reset

 soft key.  An asterisk (*) is displayed to the left of the

selected file to indicate that it will be deleted.  Pressing the 

Set/Reset

 soft key

again removes the asterisk (*) to the left of the selected file.  The file will not be

deleted.

Proceed to step 13.

Selecting the Files to Be Deleted at Once

10.

Turn the 

jog shuttle

 to select the file, directory, or medium.

11.

Press the 

All set

 soft key.  Asterisks (*) are displayed to the left of every file in

the directory containing the selected file or directory to indicate that they will be

deleted.  At the same time, the 

All Set

 soft key changes to an 

All Reset

 soft

key.

12.

Press the 

All Reset

 soft key.  Asterisks (*) are removed from the left of every file

in the directory containing the selected file or directory to indicate that they will

not be deleted.  At the same time, the 

All Reset

 soft key changes to an 

All Set

soft key.

Executing the Delete Operation

13.

Press the 

Delete Exec

 soft key.  All files with asterisk marks are deleted.

Specifying the Files to Be Displayed in the File List Window and Displaying Properties

14.

Carry out steps 19 to 21 in section 13.8, “Saving/Loading the Setup Data.”

13.15  Changing the File Attributes and Deleting Files

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды