manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 28

10-12

IM 701210-06E

Selecting the Time (or Data Points) for Shifting the Phase

10.

On models with the user-defined computation option, press the 

Next 1/2

 soft

key.

11.

Press the 

Phase Shift

 soft key.  A dialog box used to set the phase appears.

12.

Use the 

jog shuttle

 and 

SELECT

 to set the time or data points for shifting the

phase of each waveform.  If the time base is set to internal clock (Int), set the

time for shifting the phase. If the time base is set to external clock (Ext), set the

number of data points for shifting the phase.

*1

*2

*3

*4

Above is the menu when the user-defined computation option is installed.  
The menu on models without the option is as follows:
*1: Phase Shift, *2: Threshold, *3: Start Point/End Point, *4: Exec

If the time base is set to 
internal clock

If the time base is set to external clock, the 
setup menu used to set the number of data 
points for shifting the phase appears.

Turning ON/OFF the Math Waveform Display

13.

Use the 

jog shuttle

 and 

SELECT

 to set Display to ON or OFF.

As necessary, set Math2 to Math8 in a similar fashion.

Executing the Computation

14.

Press the 

Exec 

soft key.

*1

*2

*3

*4

Above is the menu when the user-defined computation option is installed.  
The menu on models without the option is as follows:
*1: Phase Shift, *2: Threshold, *3: Start Point/End Point, *4: Exec

10.4 Phase-Shifted Display

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды