Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 38 of 84
23. Adjust the eyepieces.
a. Use the z stage focus knobs to raise the z stage and bring the gold or
aluminum slide into focus; adjust the illumination as necessary.
If you cannot focus on the clean gold or aluminum slide, move stage Y axis
back so the
edge
of the slide is centered under the objective then focus on
the edge of the slide.
Z stage focus through eyepieces on edge of aluminum slide
b. Grasp the base of both eyepieces and move them until they are
aligned with your eyes as you look through the viewer.
Grasp here
You should see a single circular image when viewing through both
eyepieces if positioned correctly.
c. Move the stage Y axis forward to center the mirrored slide under the objective.
Use the z stage knobs to refine focus if necessary.
