Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 62 of 84
i. If there is a Default Registry file available, click on the word
Default to highlight it.
Check the Default load box and click Save.
Answer Yes to
Would you like to replace the setting?
Then,
click OK
to exit the window.
ii. If there is no Default Registry file, click Save As then enter
Default into the Setting name dialog box and click OK.
Then, click
on the word Default to highlight, check the Default load box and click
Save. Answer Yes to
Would you like to replace the setting?
g. Click Apply and then OK to exit the window.
