Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 16 of 84
d. Using a medium flat-blade screwdriver, loosen the four latches on the
iS50 main cover, lift straight up to remove the cover and set the cover
aside.
Loosen four latches and remove the cover
9. Unpack the iN5 interface bracket and connect to the iS50.
a. Remove the interface bracket with screws from the plastic bag.
b. Remove the tape from the arm of the bracket to release the bag of 3-
mounting screws being careful that the locator pin does not stick to the
tape. Also remove the tape from the left locator pin being careful the
pin does not stick to the tape. If so, reinsert [the flat side] of the pin(s)
into the hole(s).
