Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 59 of 84
42. Set the video properties.
a. Place a flat-white business card, print-side down on the calibration
slide and raise the z stage to focus on the fibers.
Adjust the illumination
as necessary.
b. From the Microscope drop-down menu select System Configuration
and then select Video Source.
c. Ensure all Auto checkboxes are unchecked and then select Advanced.
