Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 17 of 84
c. Carefully open the bag of mounting screws and set the screws aside.
d. Connect the iS50 touch point extension cable to the interface.
e. Place the interface next to the right-side of the iS50.
Align the channel in
the interface to the locator pin under the iS50 baseplate located left of center.
