Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 27 of 84
15. Install the iN5 components.
a. Insert a 3/32 inch balldriver into the set-screw on the right-side of the
viewer dovemount and turn counter-clockwise to back the screw out
enough to install the binocular or trinocular viewer.
b. Carefully set the viewer into the mount ensuring the eyepiece
receptacles or cover plate is facing forward.
Square the viewer to the
centerline of the iN5 and snug the set-screw so the viewer is secure. DO
NOT over tighten the screw.