Thermo Scientific 146i, Инструкция по эксплуатации

Страница: 324 / 340

C-Link Protocol Commands
I/O Configuration
B-46 Model 146 i Instruction Manual Thermo Fisher Scientific
D to A Function Single Range Dual Range Auto Range
7 Current Outputs O
3
Not Used Not Used
8 Current Outputs O
3
Not Used Not Used
9 Current Outputs Not Used Not Used Not Used
10 Current Outputs Not Used Not Used Not Used
11 Current Outputs Not Used Not Used Not Used
12 Current Outputs Not Used Not Used Not Used
list var aout
list var dout
list var din
These commands report the list of index numbers, and the variables
(associated with that index number) available for selection in the current
mode (determined by single/dual/auto, gas mode) for analog output, digital
output and digital inputs. The index number is used to insert the variable
in a field location in a list using “set sp
field index ”. The example below
reports the list of analog output, index numbers, and variables.
Send: list var aout
Receive: list var aout
index variable
0 none
1 conc
2 tgflo
3 agflo
4 tzflo
5 azflo
6 ttflo
7 atflo
8 ozone
9 perm
10 pres
11 bncht
12 lmpt
13 o3lt
14 int
15 noise
sum 311a
relay
relay stat
This command reports the current relay logic normally “open” or normally
“closed,” if all the relays are set to same state, that is all open or all closed.
The example below shows that the status when all the relays logic is set to
normally “open”.