Thermo Scientific 146i, Инструкция по эксплуатации

Страница: 285 / 340

C-Link Protocol Commands
Commands
Thermo Fisher Scientific Model 146 i Instruction Manual B-7
Command Description Page
control
oz lamp temp Reports ozonator lamp temperature B-15
ozon Sets ozonator output level B-34
ozon perm off Sets both ozonator and permeation oven output to zero B-34
perm Reports/sets permeation oven output level B-34
photometer temp Reports photometer bench temperature B-15
pres Reports photometer pressure B-9
pres comp Reports/sets photometer pressure compensation on or off B-36
program Reports/sets program on or off B-16
program no Reports instrument program number B-42
push Simulates pressing a key on the front panel B-25
range Reports/sets photometer O
3
range B-35
relay Reports/sets relay logic status of designated relay(s) B-46
relay stat Reports relay logic status for the designated relay(s) B-46
resp coef Reports/sets photometer control response coefficient B-25
ri (right) Simulates pressing right pushbutton B-26
ru (run) Simulates pressing run pushbutton B-26
save Stores parameters in FLASH B-38
save params Stores parameters in FLASH B-38
sc (screen) C-series legacy command that reports a generic response
(Use iscreen instead) B-27
sp conc Reports/sets photometer span concentration for calibration B-25
sp field Reports/sets item number and name in scratch pad list B-22
span index Reports/sets span gas level B-36
sr Reports last short record stored B-17
srec Reports maximum number of short records B-18
srec format Reports/sets output format for short records (ASCII or binary) B-19
srec layout Reports current layout of short record data B-19
srec mem size Reports maximum number of short records B-20
srec per Reports/sets short record logging period B-20
status Reports gas and span selections B-9
stream per Reports/sets current set time period for streaming data B-22
stream time Reports/sets a time stamp to streaming data or not B-22
temp comp Reports/sets photometer temperature compensation on or off B-37