Skyros VideoNet, Руководство пользователя

Страница: 371 / 463

370
SKYROS Corporation VideoNet 8.4 User guide
1. Let’s assume that priority of
“User 1
” higher than priority of “
User 2
”: “
User 1
”
has
high
priority, “
User 2
” –
normal
. Let’s assume that
“User 2”
controls Pan Tilt
camera at the present moment.
When
“User 1”
, who has
high
priority, tries to recapture controlling this camera,
the controlling will pass to
“User 1”
, as his priority higher than that of
“User 2”
(
“high”
>
“normal”
). During that,
Pan Tilt control menu
for this camera will
become active on computer of
“User 1”
and will become inaccessible on video
window of
“User 2”.
Inscription
“Used by User 1”
will be displayed on video
window of
“User 2”
in place of Pan Tilt control menu .
2. Let’s assume that priority of
“User 1”
is
high,
and priority of
“User 2”
is
low.
Let’s
assume that
“User 1”
controls Pan Tilt camera at the present moment.
When
“User 2”
tries to recapture controlling this camera, the controlling won’t
pass to
“User 2”
, as priority of the latter lower than that of
“User 1”
(
“low”
<
“high”
).
During that, Pan Tilt control menu for this camera will be active on video window
of
“User 1”
and will be inaccessible for
“User 2”.
Inscription
“Used by User 1”
will be displayed on video window of
“User 2”
in place of Pan Tilt control menu .
3. Let’s assume that priorities of
“User 1”
and
“User 2”
are
normal.
Let’s assume
that
“User 1”
controls Pan Tilt camera at the present moment.
When
“User 2”
, who also has
normal
priority, tries to recapture controlling this
camera, the controlling won’t pass to
“User 2”
, as priorities of both users are
equal
.
menu, which can be opened by clicking button.
3. If you have succeeded in recapture of controlling Pan Tilt camera, then Pan
Tilt control menu on video window will become active
for this camera, if you have failed to do recapture
controlling – the menu will be inaccessible and an
inscription, containing the name of Pan Tilt owner, will
be displayed in place of it.
Attention! Every fact of Pan Tilt device control capture by a user is registered
in the Event Log, if «Log Pan Tilt control capture» check-box is selected in the
corresponding Pan Tilt controller properties (refer to 3.1.2.10 section). A
message about Pan Tilt control capture, containing user name and computer,
on which the capture took place, will be added into the Event Log of the
computer, into configuration of which the Pan Tilt controller is added.
Let’s consider recapture of controlling Pan Tilt camera by the examples.